Norglass Liquid Glass Epoxy Clear Resin

Epoxy Resin Pour or Brush On Clear Liquid Glass

A water clear pour-on glass finish for bars, table tops and decoupage applications. Gives that ‘liquid glass look.’ Excellent adhesion, abrasion resistance and flexibility. 

Can have colourants or metallic powders added to enhance your design.

What is Liquid Glass used For?

Liquid Glass is used to fill holes and moulds in most surfaces eg timber or concrete. Can be used for decoupage applications. Liquid Glass dries exceptionally hard and is an excellent product to use for many craft and carpentry projects.

Download the How To Make A River Table sheet below for step by step information.

Features and Information about Norglass Liquid Glass Epoxy Resin:

Colour: Water clear when mixed

Toxicity: See precautions

Finish: Clear Gloss

Coverage: 1litre of mixed resin (1000cu centimetres) will cover 1m sq x 1mm thick. Can vary according to reinforcing used and pour on applications.

Drying Time: 1-2 hours (surface) 90% in 24 hours, 100% 7-10 days

Recoating: 24 hours

Pot Life: 1.5 litres of mixed resin will give a working time of 20-30 minutes in mass at 20°c, 40-50 minutes if volume is spread out into a shallow tray or dish.  If a smaller quantity is mixed (i.e.100ml) the mixed mass should be left for a minimum of 30 mins before pouring. 

Mixing Ratio: 2:1 by volume

For pouring deeper holes or moulds see Norglass DEEP POUR Liquid Glass

Click here for WORKSHOPS on Liquid Glass